·
Glossary
·
10Base2 - Ethernet specification
for thin coaxial cable, transmits signals at 10 Mbps (megabits per second) with
a distance limit of 185 meters per segment.
·
10Base5 - Ethernet specification
for thick coaxial cable, transmits signals at 10 Mbps (megabits per second)
with a distance limit of 500 meters per segment.
·
10BaseF - Ethernet specification
for fiber optic cable, transmits signals at 10 Mbps (megabits per second) with
a distance limit of 2000 meters per segment.
·
10BaseT - Ethernet specification
for unshielded twisted pair cable (category 3, 4, or 5), transmits signals at
10 Mbps (megabits per second) with a distance limit of 100 meters per segment.
·
100BaseT - Ethernet specification
for unshielded twisted pair cabling that is used to transmit data at 100 Mbps
(megabits per second) with a distance limit of 100 meters per segment.
·
1000BaseTX -Ethernet specification
for unshielded twisted pair cabling that is used to transmit data at 1 Gbps
(gigabits per second) with a distance limitation of 220 meters per segment.
·
Asynchronous Transfer Mode (ATM) - A network protocol that transmits data at a
speed of 155 Mbps and higher. It is most often used to interconnect two or more
local area networks.
·
AppleTalk - Apple Computer's
network protocol originally designed to run over LocalTalk networks, but can
also run on Ethernet and Token Ring.
·
AUI Connector (Attachment Unit
Interface) - A 15 pin connector found on Ethernet cards that can be used for
attaching coaxial, fiber optic, or twisted pair cable.
·
Bit - Binary digit in the
binary numbering system. Its value can be 0 or 1. In an 8-bit character scheme,
it takes 8 bits to make a byte (character) of data.
·
BNC Connector (Bayone-Neill-Concelman)
- Standard connector used to connect 10Base2 coaxial cable.
·
Bridge - Devices that connect
and pass packets between two network segments that use the same communications
protocol.
·
Byte - an 8-bit long binary
value, which originally mapped to text character values (between 0 and 255
decimal). For example, a decimal value of 65, represented in a binary byte is
"01000001" and represents the capital letter "A". A byte
also is the atomic value of data storage, so a megabyte is the amount of memory
required to store a million bytes.
·
Client/Server - A networking system in
which one or more file servers (Server) provide services; such as network
management, application and centralized data storage for workstations
(Clients).
·
CSMA/CA - Carrier Sense Multiple
Access Collision Avoidance is a network access method in which each device
signals its intent to transmit before it actually does so. This prevents other
devices from sending information, thus preventing collisions from occurring between
signals from two or more devices. This is the access method used by LocalTalk.
·
CSMA/CD - Carrier Sense Multiple
Access Collision Detection is a network access method in which devices that are
ready to transmit data first check the channel for a carrier. If no carrier is
sensed, a device can transmit. If two devices transmit at once, a collision
occurs and each computer backs off and waits a random amount of time before
attempting to retransmit. This is the access method used by Ethernet.
·
Coaxial Cable - Cable consisting of a
single copper conductor in the center surrounded by a plastic layer for
insulation and a braided metal outer shield.
·
Concentrator - A device that provides
a central connection point for cables from workstations, servers, and peripherals.
Most concentrators contain the ability to amplify the electrical signal they
receive.
·
DIN - A plug and socket
connector consisting of a circular pattern of pins in a metal sleeve. This type
of connector is commonly seen on keyboards.
·
Dumb Terminal - Refers to devices that
are designed to communicate exclusively with a host (main frame) computer. It
receives all screen layouts from the host computer and sends all keyboard entry
to the host. It cannot function without the host computer.
·
Ethernet - A network protocol
invented by Xerox Corporation and developed jointly by Xerox, Intel and Digital
Equipment Corporation. Ethernet networks use CSMA/CD and run over a variety of
cable types at 10 Mbps (megabits per second).
·
Expansion Slot - Area in a computer
that accepts additional input/output boards to increase the capability of the
computer.
·
Fast Ethernet - An Ethernet standard
that supports 100 Mbps using category 5 twisted pair or fiber optic cable.
·
Fiber Distributed Data Interface (FDDI) - A network protocol that is used primarily to
interconnect two or more local area networks, often over large distances.
·
Fiber Optic Cable - A cable, consisting of a center glass core surrounded by layers
of plastic, that transmits data using light rather than electricity. It has the
ability to carry more information over much longer distances.
·
File Server - A computer connected
to the network that contains primary files/applications and shares them as
requested with the other computers on the network. If the file server is
dedicated for that purpose only, it is connected to a client/server network. An
example of a legacy client/server network is Novell Netware. All the computers
connected to a peer-to-peer network are capable of being the file server. Most
modern operating systems can operate as servers or as clients, greying the
distinction in the server architecture.
·
Firewall - A security device
which inspects traffic entering and leaving a network, and allows or disallows
the traffic, depending on rules describing acceptable use of the network, by
filtering out unwanted packets. The firewall is usually positioned as the
gateway device to another network, such as the internet. Many routers now
contain firewalls. A personal firewall is usually software that runs on a
workstation or server to filter unwanted traffic at the individual machine.
·
Gigabit Ethernet - An Ethernet protocol that raises the transmission rates to 1
Gbps (gigabits per second). Most school, corporate, and household networks
provide gigabit ethernet to the workstations via cabled connections.
·
Hub - A hardware device that
contains multiple independent but connected modules of network and internetwork
equipment. Hubs can be active (where they repeat signals sent through them) or
passive (where they do not repeat but merely split signals sent through them).
·
Infrared - Electromagnetic waves
whose frequency range is above that of microwaves, but below that of the
visible spectrum.
·
Internet - A global network of
networks used to exchange information using the TCP/IP protocol. It allows for
electronic mail and the accessing ad retrieval of information from remote
sources.
·
LAN (Local Area Network) - A
network connecting computers in a relatively small area such as a building.
·
LocalTalk - Apple Corporation
proprietary protocol that uses CSMA/CA media access scheme and supports
transmissions at speeds of 230 Kbps (Kilobits per second).
·
MAN (Metropolitan Area
Network) - A network connecting computers over a large geographical area, such
as a city or school district.
·
Modem (Modulator/Demodulator)
- Devices that convert digital and analog signals. Modems allow computer data
(digital) to be transmitted over voice-grade telephone lines (analog).
·
Multiplexer - A device that allows
multiple logical signals to be transmitted simultaneously across a single
physical channel.
·
Network Modem - A modem connected to a
Local Area Network (LAN) that is accessible from any workstation on the
network.
·
Network Interface Card (NIC) - A board that provides network communication capabilities
to and from a computer.
·
Network Operating System (NOS) - Operating system designed to pass information and
communicate between more than one computer. Examples include Linux/Unix and
Windows Server.
·
Node - End point of a network
connection. Nodes include any device attached to a network such as file servers,
printers, or workstations.
·
PCMCIA - (later versions were PCMCIA2 and PC Card) An expansion slot found in many laptop
computers. Largely replaced by USB in the 2000-2010 period.
·
Peer-to-Peer Network - A network in which resources and files are shared without a
centralized management source.
·
Physical Topology - The physical layout of the network; how the cables are arranged;
and how the computers are connected.
·
Protocol -A formal description of
a set of rules and conventions that govern how devices on a network exchange
information.
·
RAID (Redundant Array of
Inexpensive Disks) - A configuration of multiple disks designed to preserve
data after a disk casualty.
·
RAM (Random Access Memory) -
The working memory of a computer where data and programs are temporarily
stored. RAM only holds information when the computer is on.
·
Repeater - A device used in a
network to strengthen a signal as it is passed along the network cable.
·
Router -A device that routes
information between interconnected networks. It can select the best path to
route a message, as well as translate information from one network to another.
Many routers now contain firewalls. Home routers can contain firewall, router,
switching (for cabled connections), and a wireless access point.
·
SCSI (Small Computer Serial Interface) - An interface controller that allows several
peripherals to be connected to the same port on a computer.
·
Segment - Refers to a section of
cable on a network. In Ethernet networks, two types of segments are defined. A
populated or trunk segment is a network cable that has one or more nodes
attached to it. A link segment is a cable that connects a computer to an
interconnecting device, such as a repeater or concentrator, or connects a
interconnecting device to another interconnecting device.
·
Sneaker-Net - Refers to a manual
method of sharing files in which a file is copied from a computer to a floppy
disk, transported to a second computer by a person physically walking
(apparently wearing sneakers) to the second computer, and manually transferring
the file from floppy disk to the second computer.
·
Speed of Data Transfer - The rate at which information travels through a network, usually
measured in megabits per second.
·
Star Topology - LAN topology in which
each node on a network is connected directly to a central network hub or
concentrator.
·
Star-Wired Ring - Network topology that connects network devices (such as
computers and printers) in a complete circle.
·
Switch - A
"intelligent" type of hub, in that it sends packets only to the
intended ports, rather than all computers on the network.
·
Tape Back-Up - A common server or
network peripheral which allows copying data and programs from a computer
system to magnetic tape. On tape, data is stored sequentially. When retrieving
data, the tape is searched from the beginning of tape until the data is found.
·
Terminator - A device that provides
electrical resistance at the end of a transmission line. Its function is to
absorb signals on the line, thereby keeping them from bouncing back and being
received again by the network.
·
Token - A special packet that
contains data and acts as a messenger or carrier between each computer and
device on a ring topology. Each computer must wait for the messenger to stop at
its node before it can send data over the network.
·
Token Ring - A network protocol
developed by IBM in which computers access the network through token-passing.
Usually uses a star-wired ring topology.
·
Topology - There are two types of
topology: physical and logical. The physical topology of a network refers to
the configuration of cables, computers, and other peripherals. Logical topology
is the method used to pass the information between workstations. Issues
involving logical topologies are discussed on the Protocol chapter
·
Transceiver (Transmitter/Receiver) -
A Device that receives and sends signals over a medium. In networks, it is
generally used to allow for the connection between two different types of cable
connectors, such as AUI and RJ-45.
·
Tree Topology - LAN topology similar
to linear bus topology, except that tree networks can contain branches with
multiple nodes.
·
Twisted Pair - Network cabling that consists
of four pairs of wires that are manufactured with the wires twisted to certain
specifications. Available in shielded and unshielded versions.
·
USB/ USB2 Port - A hardware interface
for peripherals from keyboards to hard drives, widely used on all computers.
·
WAN (Wide Area Network) - A
network connecting computers within very large areas, such as states,
countries, and the world.
·
Workgroup - A collection of
workstations and servers on a LAN that are designated to communicate and
exchange data with one another.
·
Workstation - A computer connected
to a network at which users interact with software stored on the network.
Enjoy: Glossary of Networking
No comments:
Post a Comment